Research Advances in Striated Mark Analysis for Skeletal Trauma Documentation and Identification
YIN Shanglong1,2, LI Dawu1,2
1. Key Laboratory of Impression Evidence Examination and Identification Technology, Ministry of Public Security; 2. College of Criminal Science and Forensic Science, Criminal Investigation Police University of China
YIN Shanglong, LI Dawu. Research Advances in Striated Mark Analysis for Skeletal Trauma Documentation and Identification[J]. Chinese Journal of Forensic Sciences, 2026(1): 32-40.
[ 1 ]MEYERS C R. Firearms and toolmark identification:An introduction[J]. AFTE Journal,1993,25(4):281-285.
[ 2 ] 单大国. 刑事科学技术[M]. 北京:高等教育出版社,2016.
[ 3 ] PATTEET J A,CHAMPOD C. Striated toolmarks comparison and reporting methods:Review and perspectives[J]. Forensic Science International,2024,357:111997.
[ 4 ] AMADASI A,MAZZARELLI D,ONETO C,et al. Dismemberment and toolmark analysis on bone:A microscopic analysis of the walls of cut marks[M]//ROSS A H,CUNHA E.Dismemberments. Cambridge,UK:Academic Press,2019:113-131.
[ 5 ] CERUTTI E,SPAGNOLI L,ARAUJO N,et al. Analysis of cutmarks on bone:Can light microscopy be of any help?[J]. The American Journal of Forensic Medicine and Pathology,2016,37(4):248-254.
[ 6 ] MCGEHEE K C,SCHULTZ J J. Microscopic analysis of cut mark characteristics from chopping/hacking tools[J]. Forensic Science International,2024,363:112197.
[ 7 ] SANDRAS A,GUILBEAU-FRUGIER C,SAVALL F,et al. Sharp bone trauma diagnosis:A validation study using epifluorescence microscopy[J]. International Journal of Legal Medicine,2019,133(2):521-528.
[ 8 ] SANYAVISES K,VACHIRAWONGSAKORN V. Stereomicroscopic analysis of cut marks inflicted by a knife with blade damage[J]. International Journal of Legal Medicine,2024,138(1):15-23.
[ 9 ] PELLETTI G,VIEL G,FAIS P,et al. Micro-computed tomography of false starts produced on bone by different hand-saws[J]. Legal Medicine,2017,26:1-5.
[10] SINGH R P. Examination of tool marks in the scanning electron microscope[M]//BASU S,MILLETTE J R. Electron microscopy in forensic,occupational,and environmental health sciences. Boston,USA:Springer,1986:109-115.
[11] BOREL A,OLLÉ A,VERGÈS J M,et al. Scanning electron and optical light microscopy:Two complementary approaches for the understanding and interpretation of usewear and residues on stone tools[J]. Journal of Archaeological Science,2014,48:46-59.
[12] KOOI R J,FAIRGRIEVE S I. SEM and stereomicroscopic analysis of cut marks in fresh and burned bone[J]. Journal of Forensic Sciences,2013,58(2):452-458.
[13] MARGINEDAS F,VERGÈS J M,SALADIÉ P,et al. Examining cut mark residue with SEM to identify metal tool use:An experimental study[J]. Micron,2024,180:103614.
[14] ANSARI N,DASGUPTA J,UMRE S,et al. Harnessing electron microscope for trace evidence analysis[M]//CUELLAR G H. Electron microscopes,spectroscopy and their applications. London,UK:IntechOpen,2024.
[15] KOMO L,GRASSBERGER M. Experimental sharp force injuries to ribs:Multimodal morphological and geometric morphometric analyses using micro-CT,macro photography and SEM[J]. Forensic Science International,2018,288:189-200.
[16] QIU H R. The principle and state-of-art applications for CT detector[J]. Journal of Physics:Conference Series,2022,2386(1):012060.
[17] RITMAN E L. Current status of developments and applications of micro-CT[J]. Annual Review of Biomedical Engineering,2011,13:531-552.
[18] BAIER W,NORMAN D G,WARNETT J M,et al. Novel application of three-dimensional technologies in a case of dismemberment[J]. Forensic Science International,2017,270:139-145.
[19] NORMAN D G,WATSON D G,BURNETT B,et al. The cutting edge—Micro-CT for quantitative toolmark analysis of sharp force trauma to bone[J]. Forensic Science International,2018,283:156-172.
[20] BARREAU J B,GAGNIER A,GAUGNE R,et al. Use of different digitization methods for the analysis of cut marks on the oldest bone found in Brittany (France)[J]. Applied Sciences,2022,12(3):1381.
[21] WOELBER J P,FLEINER J,RAU J,et al. Accuracy and usefulness of CBCT in periodontology:A systematic review of the literature[J]. International Journal of Periodontics & Restorative Dentistry,2018,38(2):289-297.
[22] MOZZO P,PROCACCI C,TACCONI A,et al. A new volumetric CT machine for dental imaging based on the cone-beam technique:Preliminary results[J]. European Radiology,1998,8(9):1558-1564.
[23] GAUDIO D,DI GIANCAMILLO M,GIBELLI D,et al. Does cone beam CT actually ameliorate stab wound analysis in bone?[J]. International Journal of Legal Medicine,2014,128(1):151-159.
[24] MATÉ-GONZÁLEZ M Á,ARAMENDI J,YRAVEDRA J,et al. Assessment of statistical agreement of three techniques for the study of cut marks:3D digital microscope,laser scanning confocal microscopy and micro-photogrammetry[J]. Journal of Microscopy,2017,267(3):356-370.
[25] PFEIFER N,BRIESE C. Laser scanning-principles and applications[C]//Proceedings of the Geosiberia 2007 International Exhibition and Scientific Congress. Houten,Netherlands:European Association of Geoscientists & Engineers,2007:93-112.
[26] NAVRÁTIL M,KRESÁLEK V,KOUTECKÝ A,et al. Scanning probe microscopy used for 3D topography image acquisition of marks on cartidge cases in forensic ballistics[J]. Sensors & Transducers,2016,206(11):43-51.
[27] MATÉ-GONZÁLEZ M,ARAMENDI J,GONZÁLEZ-AGUILERA D,et al. Statistical comparison between low-cost methods for 3D characterization of cut-marks on bones[J]. Remote Sensing,2017,9(9):873.
[28] BOSCHIN F,CREZZINI J. Morphometrical analysis on cut marks using a 3D digital microscope[J]. International Journal of Osteoarchaeology,2012,22(5):549-562.
[29] WALTENBERGER L,SCHUTKOWSKI H. Effects of heat on cut mark characteristics[J]. Forensic Science International,2017,271:49-58.
[30] PAN N,KAN L F,LIU Y,et al. Nonlinear tool traces fast tracing algorithm based on single point laser detection[J]. Journal of Intelligent & Fuzzy Systems,2019,36(2):1109-1120.
[31] BONNEY H. An investigation of the use of discriminant analysis for the classification of blade edge type from cut marks made by metal and bamboo blades[J]. American Journal of Physical Anthropology,2014,154(4):575-584.
[32] VORBURGER T V,SONG J,PETRACO N. Topography measurements and applications in ballistics and tool mark identifications[J]. Surface Topography:Metrology and Properties,2016,4(1):013002.
[33] GONZÁLEZ M Á M,YRAVEDRA J,GONZÁLEZ-AGUILERA D,et al. Micro-photogrammetric characterization of cut marks on bones[J]. Journal of Archaeological Science,2015,62:128-142.
[34] COURTENAY L A,YRAVEDRA J,MATE-GONZÁLEZ M Á,et al. 3D analysis of cut marks using a new geometric morphometric methodological approach[J]. Archaeological and Anthropological Sciences,2019,11(2):651-665.
[35] YANG M,MOU L,FU Y M,et al. Quantitative statistics and identification of tool-marks[J]. Journal of Forensic Sciences,2019,64(5):1324-1334.
[36] 蒋小龙,王震,李德盛. SIFT算法在钳剪痕迹中的同一认定研究[J]. 现代电子技术,2024,47(19):62-66.
[37] PAN N,YANG J,YI Z G,et al. Linear marks similarity matching algorithm based on laser detection signals[C]//Proceedings of the 7th International Conference on Modelling,Identification and Control (ICMIC) . New York,USA:Institute of Electrical and Electronics Engineers,2015:1-6.
[38] ZHANG X. Application of artificial intelligence recognition technology in digital image processing[J]. Wireless Communications and Mobile Computing,2022,2022(1):7442639.
[39] TEUWEN J,MORIAKOV N. Handbook of medical image computing and computer assisted intervention[M]. Cambridge,UK:Academic Press,2020:481-501.
[40] AGHAZADEH F,TAHAN A,THOMAS M. Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process[J]. The International Journal of Advanced Manufacturing Technology,2018,98(9):3217-3227.
[41] BYEON W,DOMÍNGUEZ-RODRIGO M,ARAMPATZIS G,et al. Automated identification and deep classification of cut marks on bones and its paleoanthropological implications[J]. Journal of Computational Science,2019,32:36-43.
[42] WU X F,LIU Y H,ZHOU X L,et al. Automatic identification of tool wear based on convolutional neural network in face milling process[J]. Sensors,2019,19(18):3817.
[43] PIZARRO-MONZO M,DOMÍNGUEZ-RODRIGO M. Dynamic modification of cut marks by trampling:Temporal assessment through the use of mixed-effect regressions and deep learning methods[J]. Archaeological and Anthropological Sciences,2020,12(1):4.
[44] GOODFELLOW I,POUGET-ABADIE J,MIRZA M,et al. Generative adversarial networks[J]. Communications of the ACM,2020,63(11):139-144.
[45] GOODFELLOW I,POUGET-ABADIE J,MIRZA M,et al. Generative adversarial nets[J]. Neural Information Processing Systems,2014,27:1-9.
[46] SHAH M,VAKHARIA V,CHAUDHARI R,et al. Tool wear prediction in face milling of stainless steel using singular generative adversarial network and LSTM deep learning models[J]. The International Journal of Advanced Manufacturing Technology,2022,121(1):723-736.
[47]CHEN B X,CHEN Y C,LOH C H,et al. Application of generative adversarial network and diverse feature extraction methods to enhance classification accuracy of tool-wear status[J]. Electronics,2022,11(15):2364.